Clik here to view.
Pluto Tx/Rx in Matlab Script
I've been playing around a bit with the Pluto using Matlab Simulink and have successfully been able to build some very simple designs - but I'm struggling a bit now as I'm trying to do the equivalent...
View ArticleClik here to view.
Change pluto device parameters during Simulink model execution
For a practical assignment, I want to create a basic Simulink model in which several properties of a common transmitter/receiver can be demonstrated. For that, it would be nice to be able to adjust...
View ArticleClik here to view.
ADALM PLUTO
1. The Xilinx® Zynq Z-7010 FPGA has a dual core Arm processor when I look it up. But your ADALM-PLUTO SDR Active Learning Module says a single Arm. Is it a dual or single arm or did the wrong...
View ArticleWhat's new in v0.25
Hello Michael Thank you for new v0.25 release on github for ADALM-Pluto. From automatic github's log is very difficult to understand which changes releated directly to ADALM-Pluto.For example...
View ArticleClik here to view.
Pluto TX-RX with Undesirable Phase Shift
I'm trying to understand why a waveform uploaded to the Pluto's internal memory and then transmitted continuously would result in a received waveform with an apparent arbitrary phase shift. Below is a...
View ArticleWill it be possible to feed in a reference clock to the ADALM-PLUTO?
I'm interested in whether it would be possible to use the ADALM-PLUTO time-of-arrival localization. This requires a very stable clock. I wonder whether it will be possible to feed in an external...
View ArticleClik here to view.
adalm pluto with raspberry pi
Hello,I just have a raspberry pi 2 with raspbian jessie and tried to install the packages needed to run gnuradio with adalm pluto on it. The steps I made was the described in GNU Radio [Analog Devices...
View ArticleClik here to view.
Pluto Low Output Power
Hi,I recently noticed my Pluto seems to be putting out a little bit less power than it used to. I'm pretty sure I used to see more or less about 7 dBm output across 400 MHz to 2 GHz. However, I now...
View ArticleRunning a GNU radio python script in plutoSDR
Hi, I am trying to have a python script generated by GNU radio running in the plutoSDR, but I am not able to do it, and I haven't found any useful information about the way of doing it.I am trying to...
View ArticleClik here to view.
Adalm Pluto SDR stopped to operate
Hello, My Pluto SDR board stopped to operate and in USB devices I can see it as "USB download gadget" and not as Pluto.See the attached photo. Please, how this issue can be solved? Thanks,Albert
View ArticleHas anyone managed to get the USB driver with PixelPulse2 v0.90 to work with...
Windows device manager shows ADALM1000 with a yellow question mark. When I double click on it, it states that the device driver is not installed. If I install the device driver manually using the 32...
View ArticleClik here to view.
ADALM-PLUTO SDRs synchronization with GPS clock.
The device consist of AD9363 and Zync FPGA - both can receive external GPS clock.Can several ADALM-PLUTO SDRs be synchronized with GPS clock?
View ArticleClik here to view.
Can't load drivers for the ADALM1000.
I'm an ADI employee. I bought a ADALM1000 for a demo at a high school on Wednesday and I can't get drivers to load.I'm running Windows still.
View ArticleAD9363 Aux DAC
Hi!I want to verify the AD9363 Aux DAC1 for PA control. But when I use the ADI IIO Oscilloscope to control the pluto , it seem doesn't work well as the figures show. Can anyone to give some advice...
View ArticleClik here to view.
Pixelpulse won't update the firmware for my ADALM1000
When I click on "Update Firmware", it would say "failed to open firmware file"How to solve this????
View ArticleDoes the Scopy App. for the ADALM 20000 allow the user to capture and export...
No further details to the question.
View ArticleADALM1000 Driver Issue
Hi All, I have installed exactly the same winusb driver using zadig (version: 6.1.7600.16385) on two computers. But, the PixelPulse 2 and MATLAB are able to detect the device on one computer but not...
View ArticleIs there an example somewhere with standalone plutoSDR signal grabbing?
Hi, at FOSDEM 2018, Robin Getz told us that it was possible to use the Adalm Pluto SDR standalone, just using a power bank and a thumb drive. I found somewhere that I had to put a file named...
View ArticleClik here to view.
Adalm Pluto SDR GUI Deploy Errors
Hello, I have built a GUI with Matlab which operates the Pluto SDR board - the GUI is working perfectly.I deployed the GUI into stand-alone application with matlab DeployTool, now the GUI is an exe...
View ArticleClik here to view.