ADALM2000 Kit User Guild
Dear All:I need ADALM2000 kit user guild ,ADI website not provide it ,can you provide PDF file to me refer. thanks Best Regards, Jack
View ArticleADALM-PLUTO firmware update fails
I'm a new ADALM-PLUTO user. I am attempting to use it with SDR# using the ADALM-PlutoSDR driver (GitHub - Manawyrm/sdrsharp-plutosdr: ADALM-PLUTO frontend for SDRSharp). The installation procedure...
View ArticleClik here to view.
increase sample rate
hi,I know this is a question a litle bit exotic but I'm curious about it. as you know the bottleneck of this board is the usb interface with about 26-24MB/s with the USB backend. This give us a max...
View ArticleClik here to view.
ADALM-PLUTO serial connection
My aim is to talk to ADALM-PLUTO via a Micro Controller using the standard Serial commands.I have tested all the commands first by using Putty and then a vb.net and everything works fine.The small...
View ArticleClik here to view.
Has anyone used "export" with pixelpulse2 and the ADALM1000? I ran it on a...
All the other functionality seems to work just fine on both platforms. I am running macOS 10.13.3 on the mac, not sure on the PC. I feel like I need to select some data or some such user input before...
View ArticleADALM-PLUTO Pre-processing I/Q Stream
Hello, I have been using the Pluto SDR with MATLAB for the last few weeks. I have an application that could benefit from pre-processing on the Pluto. I have been looking into modifying the firmware to...
View ArticleADAML1000 Win7 fail to install driver
After install pixelpulse, when connect M1K to computer(with OS WIN7, 64bit), always fail to install drivers, and already try use zadig.exe to install driver, it's not work.
View ArticleClik here to view.
ad9361-iiostream on Adalm Pluto
I'm trying to get a TX example working on the Adalm Pluto using the ad9361-iiostream example, but it will not transmit continuously. It seems like regardless of what I set the sample rate to it...
View ArticleClik here to view.
Adalm Pluto FW and/or FPGA code remote update.
How can Adalm Pluto FW and/or FPGA code be updated remotely(vs 4G usb stick in an IoT configuration)?
View ArticleADALM-Pluto non-cyclic continues transmit
I am attempting to transmit internally generated signal via the AD9361. Software runs on target (Adalm-pluto).The samples are generated for 20mS transmission. The time is measuredand takes about 8mS...
View ArticleADALM2000 doesn't come with a case?
I've received my long backordered ADALM2000 finally but it doesn't come with a case like the ADALM-PLUTO I've also got. The PCB is inside a piece of clear heatshrink sleeve and the ADALM2000 label is...
View Articlesync with external LO
hi,i want to receive and RF signal from another device and due is an OFDM signal I need to be perfectly synced in frequency due the frequency deviation is very high in base-band and don't have...
View ArticleClik here to view.
Will it be possible to feed in a reference clock to the ADALM-PLUTO?
I'm interested in whether it would be possible to use the ADALM-PLUTO time-of-arrival localization. This requires a very stable clock. I wonder whether it will be possible to feed in an external...
View ArticleInterface to MultiSim
Hi y'all, I'm interested in using the ADALM1000 and ADALM2000 (AM1k2k).At least i won't fill up the page with long identifiers after first use.The AM1k2k can be interfaced to/with MatLab controller...
View ArticleGetting ADALM-PLUTO to work with IIO scope(windows)
Hello, I recently purchased an ADALM-PLUTO, I followed the instructions to update the firmware(.28) using the mass storage device method but I am unable to get IIO-scope to work the device. It shows up...
View ArticleClik here to view.
USB datarate between Pluto and PC
Hello,how can I check a throughput between Pluto and my PC. I would like to know how efficient is my USB connection?Greetings
View ArticleADALM2000 Kit User Guild
Dear All:I need ADALM2000 kit user guild ,ADI website not provide it ,can you provide PDF file to me refer. thanks Best Regards, Jack
View ArticleADALM-PLUTO SDRs synchronization with GPS clock.
The device consist of AD9363 and Zync FPGA - both can receive external GPS clock.Can several ADALM-PLUTO SDRs be synchronized with GPS clock?
View ArticleClik here to view.
GNU Radio *on* the PlutoSDR: Proof of Concept
TL;DR: You can run GNU Radio on the Pluto's internal Zynq, but you probably don't want to. My Pluto arrived in the mail Friday, so I spent the weekend having some fun hacking on the software. I know...
View ArticleClik here to view.
ADAML1000 Win7 fail to install driver
After install pixelpulse, when connect M1K to computer(with OS WIN7, 64bit), always fail to install drivers, and already try use zadig.exe to install driver, it's not work.
View Article