My aim is to talk to ADALM-PLUTO via a Micro Controller using the standard Serial commands.
I have tested all the commands first by using Putty and then a vb.net and everything works fine.
The small amount of data I need is fine at 9600 baud.
The next stage is confusing me. My microcontroller will send Serial TTL.
I have made a test cable and with 2 USB to serial adapters, then 2 terminals working on the windows laptop.
Thats is fine.
When I connect one end of the cable to ADALM-PLUTO via a OTG cable, nothing happens.
Is there a command to tell the firmware to talk via OTG instead of the supplied USB cable?
Do I need to install drivers for the USB to Serial Adapters to work on ADALM-PLUTO.
I'm new to Linux and ADALM-PLUTO, so any help would be appreciated