Will it be possible to feed in a reference clock to the ADALM-PLUTO?
I'm interested in whether it would be possible to use the ADALM-PLUTO time-of-arrival localization. This requires a very stable clock. I wonder whether it will be possible to feed in an external...
View ArticleAdalm-Pluto in GNU
I am trying to get the adalm-pluto to work in gnu but I am having some difficulties. How do I get the blocks for it to appear in gnu? I have followed the available instructions on ADALM-PLUTO for End...
View ArticleWhat base OS do you reccomend for buildiing the firmware?
I am having problems building the firmware on debian 9.1 due to incompatibilities with openssl 1.1.0. What is the linux version you have succesfully build plutsdr-fw on so I can spin up a VM at the...
View ArticleClik here to view.
Use ADALM1000 to record 30 seconds length of data
Hi, Dave and all ADALM1K experts, I plan to use adalm1000 as DQA device. The board has fixed sample rate of 100k SPS, with buffer size about 100k records, the total length of data is 1 second. I wonder...
View ArticleWhat is the root login on ADALM-PLUTO
When you connect your ADALM-PLUTO SDR for the first time it shows up with a serial device, when you open a screen session you have access to logging into Linux on the Zynq. Normally on the Zynq and...
View ArticleADALM-PLUTO's driver can't be installed.
ADALM-PLUTO's driver can't be installed.[Device Install Log] OS Version = 6.1.7601 Service Pack = 1.0 Suite = 0x0100 ProductType = 1 Architecture = amd64[BeginLog][Boot Session: 2017/09/12...
View ArticleSuppressing transmit path to increase bandwidth for receive.
Is there any easy way of temporarily turning off the transmit path? Or if you are not actually using it does it not use bandwidth? I'm a little confused. I am doing testing with the usb driving a gig...
View ArticleHow does the file Storage interface on USB get setup
I have "almost successfully" built my own firmware for the ADALM-PLUTO. The remaining issue is that although the iio, serial, http and ip connectivity works well the regenerated firmware produces a...
View ArticleClik here to view.
Adalm Pluto Simulink Receiver Gain Control
Simulink receiver block the "source gain" can operate in 4 modes: AGC Slow Attack — Use this mode with signals whose power varies slowly over time.AGC Fast Attack — Use this mode with signals with a...
View ArticleClik here to view.
Unable to create IIO context: No such file or directory
hi, when running some of the test and examples available in libiio folder I get this error about the context file but context.c in in the libiio folder. I was able to run the iio-monitor but not...
View ArticleWho wrote the ADALM-PLUTO Matlab support package and can we support 2016b?...
Matlab 2017a is *extremely* new. The requirement to use the latest and greatest version of Matlab is surprising. I am sure there are many users who have purchased a version of Matlab even last year....
View ArticleIIO Oscilloscope has no settings, etc for Pluto
I just recently got my Pluto and downloaded the software and hooked it up but when I go to IIO Oscilloscope, it recognizes it on USB or with IP address, but there is no settings, etc, for Pluto. I see...
View ArticleClik here to view.
Pluto error in gnuradio. WARNING: Unknown children 'context-attribute' in
Running iio_info gives me this. root@debian:~/prefix/default# iio_info -n 192.168.2.1 | grep deviceWARNING: Unknown children 'context-attribute' in <context>WARNING: Unknown children...
View ArticleAdalm Pluto Transmit Data via Libiio in C++
I'm having some trouble transmitting data from my pluto, as far as I can tell it's not being modulated onto the carrier wave but is being sent to hardware. I can get samples from the pluto so wanted to...
View ArticleClik here to view.
How to autoload my program on ADALM-PLUTO?
Hello everyone,I had wrote a test program "hello world" that was load on PlutoSDR by tftp. This program can run on ADALM-PLUTO.Now I want to put this program onADALM-PLUTO.Next the system power on,this...
View Articlexilinx jtag programmer with adalm pluto
Hello,I have a xilinx usb jtag programmer version 2 like this:HW-USB-II-G XILINX, Cable, Platform Cable USB II, Configuración y Programación en Circuito de Dispositivos Xilinx | Farn… And I would like...
View ArticlePlutoSDR raw data interpretation
Need help to interpret the raw data from PlutoSDR[-0.01074219-0.00537109j -0.00830078+0.02246094j -0.00146484+0.01171875j ..., -0.00732422+0.00878906j 0.00097656+0.00585938j -0.00048828+0.00292969j]...
View ArticleClik here to view.
Can I recompile pluto-sdr FW with the arm-linux-gnueabihf toolchain
I noted that the pluto sdr FW is compiled using the arm-xilinx-linux-gnueabi toolchain only supporting SW emulated FP.I am wondering if I can safely use instead the arm-linux-gnueabihf supporting HW...
View ArticleADALM2000 Matlab support package
Hello, Do you have plan to be released MATLAB(and Simlink) Support package?ADALM1000 has the support package.Analog Devices ADALM1000 Support from Data Acquisition Toolbox - Hardware Support - MATLAB...
View ArticleClik here to view.
Hardware setup test of ADALM-PLUTO SDR fails during Radio Connection test
I've installed drivers, adalm firmware, hardware support package to use adalm pluto with Matlab and Simulink, but during Hardware Setup at step which check radio connection and test connection, the...
View Article