Alice desktop 1.1 and the meter software keeps on crashing after several...
Additional: Alice is not installed in the program directory. I use the adalm1000 throug a usb 3 hub. Mayby this is a cause?
View ArticleClik here to view.
ADALM1000 firmware upgrade problem.
First off, I'm real new to this. The only other type of board I've used is T.I.'s launch pad with Energia.I did the following :- plugged it in and started PixelPlus2 0.90. It didn't find the...
View ArticleClik here to view.
Are there differing response times for various Photo Diodes?
I am trying to build a LiDAR experiment utilizing the Time-of-Flight technique. Doing so requires advanced timing circuitry in the sub-nanosecond range. One of my concerns is the response time of the...
View ArticleHow to become adalm-pluto developer and get a device?
Very interested in this device but didn't see any way to get early access. Thanks
View ArticleClik here to view.
PuxelPulse doesn't work on Windows 10
I bouth ADALM1000 and ADALP2000 for one of my students and soft for ADALM1000 (PixelPulse2 version 0.8 and 0.85) doesn't work in Windows 10. This is somewhatdisappointedme becauseI expected thatthis...
View ArticlePixelpulse2 with ADALM1000 on Linux
Hello, I use openSUSE 13.2, KDE 4 and QT5.The Pixelpulse2 is running, but if i try to save or restore data i got the error message: QWidget: Cannot create a QWidget without QApplication Can anybody...
View ArticleClik here to view.
Will it be possible to feed in a reference clock to the ADALM-PLUTO?
I'm interested in whether it would be possible to use the ADALM-PLUTO time-of-arrival localization. This requires a very stable clock. I wonder whether it will be possible to feed in an external...
View ArticleClik here to view.
Expose 2nd RX and TX port of ADALM-PLUTO
Hi ADALM-PLUTO Designer(s), some advanced users may want to utilize the second RX channel and TX channel of the AD9363. They generally have no problem adding some coupling Cs, baluns and coaxes to a...
View ArticleADALM1000 on Raspberry Pi
Hello, I tried to use ADALM1000 on Raspberry Pi.I referred to Github for installing libsmu.GitHub - analogdevicesinc/libsmu: Software abstractions for the analog signal exploration tools. First, I...
View ArticleWhat is the expected voltage range on the 2.5 V output on the ADALM1000?
I have been using the ADALM1000 to work through the labs in the Engineering Discovery set. While doing the first two Class A amplifier labs I noticed my output is not centered around 2.5 V as per the...
View ArticleClik here to view.
ADALM2000 - Purchasing from official Analog Devices webpage
Hello there, I have noticed that the ADALM2000 is being sold only in the Analog Devices webpage and not the other distributors as of this time. So if I have to purchase the ADALM2000 from the official...
View ArticleWhere do I find the "iio-examples" folder for Pluto.
I want to use GNU radio DSP with my Pluto. The Pluto WIKI refers to an "iio-examples" folder. Where is that folder located.Regards,John Petrich
View ArticleClik here to view.
When will Adalm Pluto will be shipped? End of April is over?!
I would be happy to get my preordered Pluto, so when will it be available?
View ArticleHow can I make HMC284MS8G switch in DC operation?
Hi.I'm using HMC284MS8G chip for switch.I want to use this HMC284MS8G chip in DC.If I inject DC voltage to RFC port, the waveform of output is not pulse waveform.In the datasheet, the switch can...
View ArticleADALM1000 latest firmware
Hello, I have a question about firmware of ADALM1000.Wiki states that v2.08 is required in the page of Alice.(https://wiki.analog.com/university/tools/m1k/alice/desk-top-users-guide)But v2.06 is the...
View ArticleClik here to view.
ADALM1000 USB trouble
I just received my ADALM1000 and I can't get it to recognize the USB. I'm running Win7 32 bit and it shows in other devices in the device manger. And it says no driver I tried to update the driver and...
View ArticleIs ADALM2k a open source project just like ADLAM1K?
and more related questions:Why ALM2K choose to use different GUI interface, not use ALICE?Is there a plan to provide case enclosure for alm1k? The usb port is not mounted rather than solder points....
View ArticleUse ADALM1000 to record 30 seconds length of data
Hi, Dave and all ADALM1K experts, I plan to use adalm1000 as DQA device. The board has fixed sample rate of 100k SPS, with buffer size about 100k records, the total length of data is 1 second. I wonder...
View ArticleClik here to view.
ADALM1000 Pixelpulse2 displays blank, white screen when starting on Windows 10
When installing and running PixelPulse2 (v0.90) in a Windows 10 laptop everything installs fine, but when I run the application I simply get a plain white screen (as shown below). Any ideas on the...
View ArticleClik here to view.
Tuning ADALM-PLUTO beyond the 325-3800MHz range
Our application requires receiving RF signals below 325 MHz. However, according to the advertised feature of ADALM-PLUTO and the RF transceiver the device uses (AD9363), it is only capable of tuning...
View Article